Technical data

36 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz

:SYSTem:PRESet:TYPE? “Preset Type" on page 478

:SYSTem:PRESet[:USER]:SAVE “Save User Preset" on page 480

:SYSTem:SECurity:CLEAr “Secure Erase All" on page 503

:SYSTem:SECurity:ENABle ON|OFF “Security" on page 504

:SYSTem:SECurity:ENABle “Security" on page 504

:SYSTem:SECurity:IMMediate “Secure Erase User" on page 503

:SYSTem:TIME <hour>,<minute>,<second> “Set Time" on page 482

:SYSTem:TIME:ADJust <seconds> “Adjust Time Setting (Remote Command Only)" on page 482

:SYSTem:TIME? “Set Time" on page 482

:SYSTem:VERSion? “SCPI Version Query (Remote Command Only)" on page 509

:TRACe:COPY <src_trace>,<dest_trace> “1 -> 3" on page 521

:TRACe:COPY <src_trace>,<dest_trace> “2 -> 3" on page 521

:TRACe:EXCHange: <trace_name>, <trace_name> “1 <-> 2" on page 520

:TRACe:EXCHange: <trace_name>, <trace_name> “2 <-> 3" on page 520

:TRACe:MATH:ADD <dest_trace>,<src_trace>,<src_trace> “Trace Addition (Remote Command Only)" on

page 522

:TRACe:MATH:MEAN? <src_trace> “Trace Mean (Remote Command Only)" on page 522

:TRACe:MATH:SUBTract <dest_trace>,<src_trace>,<src_trace> “Trace Subtraction (Remote Command

Only)" on page 522

:TRACe:MATH:SUBTract:DLIN <trace_name> “2 – DL -> 2" on page 520

| <comma_separated_ASCII_data> “Send/Query Trace Data (Remote Command Only)" on page 512

(Remote Command Only)" on page 512

:TRACe[:DATA]? TRACE1|TRACE2|TRACE3|LLINE1|LLINE2 “Query Trace Data (Remote Command

Only)" on page 170

:TRACe[1]|2|3:MODE? “Trace/View" on page 511

:TRIGger[:SEQuence]:DELay <time> “Trig Delay" on page 535

:TRIGger[:SEQuence]:DELay:STATe OFF|ON|0|1 “Trig Delay" on page 535

:TRIGger[:SEQuence]:DELay:STATe? “Trig Delay" on page 535

:TRIGger[:SEQuence]:DELay? “Trig Delay" on page 535