Technical data

Measurement Setup 15
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 353
Meas Setup (Intermod (TOI))
When Intermod (TOI) measurement has been selected in the Measure menu of the
Spectrum Analysis Mode, this key displays the appropriate measurement setup menu for
third order intercept (TOI).
The TOI measurement computes and displays the output intercept point (IP3), and places
markers upon the trace to indicate the measured signals and third-order products. The span
must be wide enough so that the signals and their intermod products are visible on the
display. Otherwise the TOI signal pattern cannot be identified and the measurement routine
will not function.
Key Path: Front-panel key
Dependencies/Couplings: Menu changes depending on the Mode and Measurement
selected.
Remote Command:
There is no equivalent remote command.