Technical data

Measurement Setup 15
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 345
Meas Setup (Burst Power)
When Burst Power has been selected in the Measure menu of the Spectrum Analysis
Mode, this key displays the appropriate measurement setup menu.
The burst power measurement is an accurate method of determining the average power for
the specified burst.
1 Select RF Burst Setup. (Trig, RF Burst Setup)
2 Set the trigger level mode to relative. (Trigger Level (Rel)
3 Set the narrow pulse discriminator to off. (Narrow Pulse Discriminator (Off)
4 Set the threshold level to –30 dB. (Meas Setup, Threshold Lvl, – 3, 0, dB)
Key Path: Front-panel key
Remote Command:
There is no equivalent remote command.