Technical data

Measurement Setup 15
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 337
Range Table (On/Off)
Specifies whether the range table is to be used or not. When Range Table is set to Off the
harmonics are measured. When Range Table is set to On the first active range is considered
to be the fundamental and the subsequent active ranges are used as the harmonics. At
least two ranges must be active if Range Table is set to On.
Key Path: Meas Setup
Factory Preset: Table 6 on page 338.
Range: Off|On
Remote Command:
[:SENSe]:HARMonics:RTABle:STATe OFF|ON|0|1
[:SENSe]:HARMonics:RTABle:STATe?
Example:
HARM:RTAB:STAT OFF