Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsTV Converter BoxN8201A
321322323324325326327328329330
326 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
15 Measurement Setup
Noise Correction
Turns noise correction on or off. When you set Noise Correction to On, a calibration of the
noise floor is performed and used to correct for N8201A noise floor contribution to
measurement levels, increasing dynamic range.
Key Path: Meas Setup
Key Notes: This key is not available when Meas Setup, Method (RBW) is selected or
when signal tracking is on.
State Saved: Saved in Instrument State.
Factory Preset: Off
Remote Command:
[:SENSe]:MCPower:CORRection:NOISe[:AUTO] OFF|ON|0|1
[:SENSe]:MCPower:CORRection:NOISe[:AUTO]?
Remote Command Notes:
The noise correction feature is not available when the measurement method is RBW (Meas
Setup, Method (RBW) or when signal tracking is on.
Example:
MCP:CORR:NOIS 1
MCP:CORR:NOIS?