Technical data

312 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
15 Measurement Setup
Key Path: Meas Setup, Carrier Setup
Dependencies/Couplings: The reference carrier can be re-assigned by implementing
changes to carrier power present values.
State Saved: Saved in Instrument State.
Factory Preset: Auto/Calculated based on current center frequency. Refer to the
algorithm above when defining the Ref Carrier Freq(Auto) key.
Te rm in a tor s: Hz, kHz, MHz, GHz
Default Terminator GHz
Resolution: 1 Hz
Range: N8201A minimum to N8201A
Remote Command:
[:SENSe]:MCPower:RCFRequency <Freq>
[:SENSe]:MCPower:RCFRequency?
[:SENSe]:MCPower:RCFRequency:AUTO OFF|ON|0|1
[:SENSe]:MCPower:RCFRequency:AUTO?
Example:
MCP:RCFR 2 GHz
MCP:RCFR?
Configure Carriers
Accesses the Config Carriers menu that allows further definition of each carrier.
Key Path: Meas Setup, Carrier Setup
Remote Command: There is no equivalent remote command.
Carrier
Selects the carrier number you wish to configure.
Key Path: Meas Setup, Carrier Setup, Configure Carriers
Dependencies/Couplings: All keys available on the Configure Carrier key menu are
coupled to this key.