Technical data

308 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
15 Measurement Setup
Avg Number
Enables you to specify the number of measurements that will be averaged when calculating
the measurement result. The average will be displayed at the end of each sweep. Setting
Avg Number to Off disables the measurement averaging.
Key Path: Meas Setup
State Saved: Saved in Instrument State.
Factory Preset: 10 / Off
Range: 1 through 1000
Remote Commands:
[:SENSe]:MCPower:AVERage:COUNt <integer>
[:SENSe]:MCPower:AVERage:COUNt?
[:SENSe]:MCPower:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:MCPower:AVERage[:STATe]?
Example:
MCP:AVER:COUN 10
MCP:AVER:COUN?
MCP:AVER OFF
MCP:AVER?