Technical data

Measurement Setup 15
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 271
Avg Number
Specifies the number of measurement averages used when calculating the measurement
result set Avg Number to On. The average will be displayed at the end of each sweep.
Setting Avg Number to Off disables measurement averaging.
Key Path: Meas Setup
State Saved: Saved in Instrument State.
Factory Preset: 10 averages/ Off
Range: 1 to 1000
Remote Command:
[:SENSe]:CHPower:AVERage:COUNt <integer>
[:SENSe]:CHPower:AVERage:COUNt?
[:SENSe]:CHPower:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:CHPower:AVERage[:STATe]?
Example:
CHP:AVER:COUN 10
CHP:AVER:COUN?
CHP:AVER OFF
CHP:AVER?