Technical data

Measure (Spectrum Analysis Mode) 14
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 265
Using Power Spectral
Density Reference
n=6 Power Spectral Density Reference
Returns 12 comma-separated scalar values (in dBc/Hz) of
the power relative to the carrier at the segment frequencies
(14 when offset F is active). Returns –999.0 for the offsets
in WLAN standard:
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E)
If offset F is active:
13.Negative offset frequency (F)
14.Positive offset frequency (F)
n=7 Returns 12 comma-separated pass/fail test results
(0 = passed, or 1 = failed) determined by testing the
absolute power in each offset against the specified offset’s
absolute power limits (14 when offset F is active):
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E)
If offset F is active:
13.Negative offset frequency (F)
14.Positive offset frequency (F)
n=8 Returns 12 comma-separated scalar values of the pass/fail
(0 = passed, or 1 = failed) results determined by testing the
relative power in each offset against the specified offset’s
relative power limits (14 when offset F is active):
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E)
If offset F is active:
13.Negative offset frequency (F)
14.Positive offset frequency (F)
Measurement Results Available (continued)
Command / Condition n Results Returned