Technical data

Measure (Spectrum Analysis Mode) 14
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 263
Using Power Spectral
Density Reference (Continue
d)
n=1 (or
not
specified)
17.Absolute power on the positive offset A (dBm/Hz). For
WLAN Radio Std., returns –999.0.
18.Relative peak power on the positive offset A (dB)
19.Absolute peak power on the positive offset A (dBm/Hz)
20.Peak frequency in the positive offset A (Hz)
21.Relative power on the negative offset B (dB). For WLAN
Radio Std., returns –999.0.
…
59.Absolute peak power on the positive offset E (dBm/Hz)
60.Peak frequency in the positive offset E (Hz)
If offset F is active:
61.Relative power on the negative offset F (dB). For WLAN
Radio Std., returns –999.0.
62.Absolute power on the negative offset F (dBm/Hz). For
WLAN Radio Std., returns –999.0.
63.Relative peak power on the negative offset F (dB)
64.Absolute peak power on the negative offset F (dBm/Hz)
65.Peak frequency in the negative offset F (Hz)
66.Relative power on the positive offset F (dB). For WLAN
Radio Std., returns –999.0.
67.Absolute power on the positive offset F (dBm/Hz). For
WLAN Radio Std., returns –999.0.
68.Relative peak power on the positive offset F (dB)
69.Absolute peak power on the positive offset F (dBm/Hz)
70.Peak frequency in the positive offset F (Hz)
n=2 Returns the displayed frequency domain spectrum trace
data separated by comma. The number of data points is
determined by the setting of the trace points parameter.
n=3 Returns the displayed frequency domain absolute limit
trace data separated by comma. The number of data points
is determined by the setting of the trace points parameter.
n=4 Returns the displayed frequency domain relative limit trace
data separated by comma. The number of data points is
determined by the setting of the trace points parameter.
Measurement Results Available (continued)
Command / Condition n Results Returned