Technical data

228 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
13 Meas Control
Restart
This function restarts a previously paused measurement at the beginning. If the current
measurement is still in process, it will stop it as soon as possible and restart it from the
beginning.
Key Path: Front-panel key. It can also be found under Meas Control.
Remote Command:
:INITiate:RESTart
Remote Command Notes:
This command is equivalent to sending an :ABORt command followed by an
:INITiate[:IMMediate] command. See“Abort the Sweep or Measurement (Remote
Command Only)" on page 232. for more information.
Example:
INIT:REST