Technical data

Marker 11
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 211
Example:
CALC:MARK3:MODE SPAN selects marker 3 and sets it to Span Pair.
CALC:MARK4:X:POS:SPAN 200 sets the spacing between the markers to 200 trace
points for marker pair 4.
CALC:MARK2:X:POS:CENT 300 sets the midpoint between the markers to the 300th
trace point from the left of the display. For a 601 point trace this will be the middle of the
display.
Off
Turns off the selected marker. In addition, Off turns off functions related to the selected
marker such as Signal Track, Band/Intvl Power, and Marker Noise and removes marker
annotation from the display.
Key Path: Marker
Remote Command:
See “Marker" on page 203 for the command to select the control mode.
Example:
CALC:MARK3:STAT OFF selects marker 3 and sets it to Off.