Technical data

200 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
10 Marker ->
Mkr->CF
Sets the center frequency of the N8201A to the frequency of the selected marker. The
marker stays at this frequency, so it moves to the center of the display. This function is not
available in Zero Span.
Key Path: Marker ->
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:CENTer
Example:
CALC:MARK2:CENT sets the CF of the N8201A to the value of marker 2.
Mkr->CF Step
Sets the center frequency (CF) step size of the N8201A to the marker frequency, or in a
delta-marker mode, to the frequency difference between the delta and reference markers.
The step size is displayed in the third line of the active function area of the display. This
function is not available in Zero Span.
Key Path: Marker ->
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:STEP
Example:
CALC:MARK1:STEP sets the CF step to the value (or delta value) of marker 1.
Mkr->Start
Changes the start frequency to the frequency of the active marker. The marker stays at this
frequency, so it moves to the left of the display. This function is not available in Zero Span.
Key Path: Marker ->
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:STARt
Example:
CALC:MARK1:STAR sets the start frequency to the value (or delta value) of marker 1.