Technical data

194 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
9 Input/Output
[:SENSe]:MIXer:HARMonic:AUTO OFF|ON|0|1 or <boolean>
[:SENSe]:MIXer:HARMonic:AUTO?
[:SENSe]:MIXer:HARMonic <integer>
[:SENSe]:MIXer:HARMonic?
Example:
MIX:HARM:AUTO 0
MIX:HARM 8
Mixer Type
Selects which type of mixer is in use. Mixer Type (Presel) activates a tuning signal that is
routed to the PRESEL OUT connector on the front panel of the N8201A. This signal has a
sensitivity of 1.5V/GHz of the LO frequency and drives the tune input of the HP/Agilent
11974 series of preselected mixers. The sweep rate in
Presel mode is limited to 40
MHz/ms.
Key Path: Input/Output, External Mixer, Mixer Config
Dependencies/Couplings: Only available in bands A, Q, U and V, and only when Mixer
Bias
is off.
State Saved: Saved in Instrument State
Factory Preset: Unpre
Remote Command:
:INPut:MIXer:TYPE PRESelected|UNPReselect
:INPut:MIXer:TYPE?
Example: INP:MIX:TYPE UNPR
Mixer Bias
Turns on/off the Mixer Bias and adjusts an internal bias source for use with external
mixers.
Key Path: Input/Output, External Mixer, Mixer Config
Dependencies/Couplings: If Mixer Type is set to Presel and Harmonic is set to Auto,
then the Mixer Bias key is set to Off and it is not available (grayed out).
If Mixer Bias is set to On and Harmonic is set to Auto, then the Mixer Type key is set to
Unpresel and it is not available (grayed out).