Technical data

170 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
7 File
Query Trace Data (Remote Command Only)
This command queries trace data from the specified trace. The data format is set by the
command :FORMat [:TRACe][:DATA]. When ASCII format is selected, the data is
comma-separated ASCII values. Real or Integer format uses a definite length block of data.
The number of trace points returned is set by [:SENSE]:SWE:POIN (from 101 to 8192).
Remote Command:
:TRACe[:DATA]? TRACE1|TRACE2|TRACE3|LLINE1|LLINE2
Remote Command Notes:
Commands :MMEM:STOR:TRAC and :MMEM:LOAD:TRAC are used to transfer trace
data to, or from, the internal hard drive or floppy drive of the instrument.
The query returns the current values of the designated trace. The data is terminated with
<NL><END> (for GPIB that is newline, or linefeed, followed by EOI set true.)
Example:
TRAC:DATA? TRACE1