Technical data

File 7
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 155
Trace 3
Selects trace 3 to be saved.
Key Path: File, Save, Source
All Traces
Selects all the traces to be saved.
Key Path: File, Save, Source
Name
Displays the Alpha Editor and enables you to enter a filename. The numeric keypad can also
be used while entering file names. Press
Enter or Return to complete the name entry.
Only capital letters (A-Z) and digits (0-9) may appear in file names (8 characters, maximum).
Additionally, file names include a 3 digit extension which is automatically set by the
instrument depending on the file type and format.
Key Path: File, Save
Remote Command: The file name is entered as part of the directory path name that is
sent with the SCPI command. See “Save Now" on page 150.
Dir Up
Moves up one subdirectory level within a directory. If your position is in the top level of the
drive already, it moves up to the drive level and the current drive is highlighted (A: or C:).
Key Path: File, Save
Remote Command: The directory is entered as part of the directory path name that is
sent with the SCPI command. See “Save Now" on page 150.
Dir Select
Displays the highlighted directory. See “Dir Select" on page 155 for more information.
Key Path: File, Save
Remote Command: The directory is entered as part of the directory path name that is
sent with the SCPI command. See “Save Now" on page 150.