Technical data

154 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
7 File
Key Path: File, Save, Format
Bitmap
When the file type is Screen, this key selects the bitmap Graphics Interchange Format
(GIF) file format for your saved data. For more information on file types, refer to “File
Ty p e s " on page 144.
Key Path: File, Save, Format
Reverse Bitmap
When the file type is Screen, this key selects the inverse bitmap file format (GIF) for your
saved data. For more information on file types, refer to “File Types" on page 144.
Key Path: File, Save, Format
Source
When the file type is set to Trace, this key allows you to save trace 1, 2, 3 or All. Saving
trace
All saves all traces in a single.TRC file.
When the file type is set to
Corrections, Source accesses the Antenna, Cable, Other
and
User menu keys, which allow you to select the type of correction to be saved.
When the file type is set to
Limits, Source accesses the Limit 1 and Limit 2 menu keys.
Limit 1 and Limit 2 provide data sets to determine whether a trace has exceeded preset
specifications. Limit sets can hold up to 200 points and can only be saved individually.
For any other Save type,
Source is unavailable (grayed out).
Key Path: File, Save
State Saved: Source is not saved in Instrument State.
Factory Preset: Source survives Factory Preset and *RST, but is set to All Traces at
power up.
Trace 1
Selects trace 1 to be saved.
Key Path: File, Save, Source
Trace 2
Selects trace 2 to be saved.
Key Path: File, Save, Source