Technical data

File 7
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 153
All
is not an option in Save, you have to specify the desired file type.
Key Path: File, Save
State Saved: Type is not saved in the instrument state
Factory Preset: Type survives Factory Preset and *RST, but is set to State at power on.
Format
When Type is set to Trace, Format allows you to choose between Trace + State and CSV
formats. For more information on file types, refer to “File Types" on page 144.
When
Type is set to Screen, Format allows you to choose between Bitmap and Reverse
Bitmap
formats. For more information on file types, refer to “File Types" on page 144.
Key Path: File, Save
State Saved: Format is not saved in Instrument State.
Factory Preset: Format survives Factory Preset and *RST, but:
Trace file format is Trace + State at power on.
Screen file format is Bitmap at power on.
Trace + State
When the file type is Trace, this key selects the Trace + State, instrument-readable file
(TRC) format for your file. For more information on file types, refer to “File Types" on
page 144.
Key Path: File, Save, Format
CSV
When the file type is Trace, this key selects the trace data as comma-separated values
(CSV). The
CSV format is readable by a spreadsheet on your computer, but the trace cannot
be restored to the analyzer display. For more information on file types, refer to “File
Ty p e s " on page 144.
Corrections Internal data format ANT, CBL, OTH, and
AMP
Measurement
Results
Comma separated values CSV
Type Format Source Extension