Technical data

130 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
6 Display
:CALCulate:LLINe[1]|2:MARGin <ampl_rel>
:CALCulate:LLINe[1]|2:MARGin?
Edit
Pressing Edit accesses menus for editing limit lines and for accessing the limit-line table
editor. Navigation through the limit-line table is achieved by using the keyboard. Entering
data in each field navigates to the next field. New limit segments will only be applied after
the editor is closed.
Key Path:
Display, Limits, Limit 1
Display, Limits, Limit 2
Point
Up to 200 points may be defined for each limit line using Point. A maximum of two different
points may be entered that have the same frequency. Enter the point number to be created
or edited using the numeric keypad, then press
Enter, or use the front-panel knob, or step
keys to move to an existing point. The step-up key takes you to the next point, while the
step-down key takes you to the previous point. After selecting a point,
Frequency (or Time,
depending on x-axis selection) becomes active.
Key Path:
Display, Limits, Limit 1, Edit
Display, Limits, Limit 2, Edit
State Saved: Not affected by state.
Factory Preset and *RST: 1
Factory Default: 1
Te rm in a tor s: Enter
Default Terminator: Enter
Resolution: 1
Step Key Increment: 1
Range: 1 to 200