Technical data

122 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
5 Det/Demod
RMS (Remote Command Only)
Selects the Average Detector. If BW/Avg, Avg/VBW Type is set to Auto (or Pwr Avg) this
will yield the RMS voltage (average power) for each trace point. (See “A v e r a g e " on
page 112.)
Key Path: There is no key selection for this setting, but you can access it by using
Average Detector (see “Av era g e" on page 112).
Remote Command:
See“Detector Auto Manual" on page 106.
Example:
DET RMS