Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsTV Converter BoxN8201A
41424344454647484950
44 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
2 Using the LAN Interface
9
Click Submit (accept the default password) and the following dialog box should appear.
The default password is set to “agilent”.
Tip: You can change the password from the View & Modify LAN Connections. (Scroll
down the Parameter column until you locate the Change Password parameter.)
10 Change the DHCP and Auto IP radio-buttons to Off. Change the IP address, Subnet
Mask, and Default Gateway values to meet your network requirements.
11 Click Save to save the new settings. Parameters marked with an asterisk (*) also require
that you click "Renew LAN settings" before changes take effect.