Technical data

Digital Modulation Commands 10
Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz 329
Example
:DM:SKEW:PATH BB
The example selects the baseband path for I/Q skew and calibration.
*RST RF
:SKEW[:STATe]
Supported N8212A
[:SOURce]:DM:SKEW[:STATe] ON|OFF|1|0
[:SOURce]:DM:SKEW[:STATe]?
Enables or disables the I/Q skew correction function.
Example
:DM:SKEW:STAT 0
The preceding example disables I/Q skew corrections.
*RST 1
:SOURce
Supported N8212A
[:SOURce]:DM:SOURce[1]|2 EXTernal|EXT600|OFF
[:SOURce]:DM:SOURce?
Selects the I/Q modulator source for one of the two possible paths.
EXTernal Selects an external 50 ohm source as the I/Q input to I/Q modulator.
EXT600 Selects a 600 ohm impedance for the I and Q input connectors and routes the
applied signals to the I/Q modulator.
OFF Disables the I/Q input.
Example
:DM:SOURCE1 EXT
The example selects an external 50 ohm source as the modulation source for path 1.
*RST EXT