Technical data

306 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
9 Analog Commands
:PM[:DEViation]:STEP[:INCRement]
Supported Option UNT
[:SOURce]:PM[:DEViation]:STEP[:INCRement]<val><units>|MAXimum|MINimum|D
EFault
[:SOURce]:PM[:DEViation]:STEP[:INCRement]?
Sets the phase modulation deviation step value.
The value set by this command is used with the UP and DOWN choices for the FM deviation
command. Refer to “:PM[1]|2[:DEViation]" on page 304 for more information.
The setting is not affected by a power-on, preset, or *RST command.
Example
:PM:STEP 20RAD
The example sets the step value to 20 radians.
Range 0.001–1E3 radians