Technical data

302 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz

9 Analog Commands

PM[1]|2:INTernal2:FUNCtion:SHAPe

Supported Option UNT

[:SOURce]:PM[1]|2:INTernal2:FUNCtion:SHAPe?

Sets the phase modulation waveform type for internal source 2.

Example

:PM1:INT2:FUNC:SHAP RAMP

The example selects a ramp modulation for ΦM path 1, source 2.

*RST SINE

:PM[1]|2:INTernal[1]:SWEep:RATE

Supported Option UNT

[:SOURce]:PM[1]|2:INTernal[1]:SWEep:RATE <val><units>

[:SOURce]:PM[1]|2:INTernal[1]:SWEep:RATE?

Sets the sweep rate for a phase-modulated, swept–sine waveform. Refer to

“:PM[1]|2:INTernal[1]:FUNCtion:SHAPe" on page 301 for the waveform selection.

Example

:PM1:INT:SWE:RATE 30KHZ

The example sets the sweep rate to 30 kHz.

*RST +4.00000000E+002

Range 0.5 Hz – 100 kHz

:PM[1]|2:INTernal[1]:SWEep:TRIGger

Supported Option UNT

[:SOURce]:PM[1]|2:INTernal[1]:SWEep:TRIGger BUS|IMMediate|EXTernal

[:SOURce]:PM[1]|2:INTernal[1]:SWEep:TRIGger?

Sets the trigger source for the phase-modulated, swept–sine waveform.

BUS Enables LAN triggering using the *TRG command.