Technical data

Analog Commands 9

Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz 293

:LFOutput:FUNCtion[1]|2:SHAPe

Supported Option UNT

SQUare|RAMP|PULSe|NOISe|DC

[:SOURce]:LFOutput:FUNCtion[1]|2:SHAPe?

This command selects the waveform type. Function Generator 1 must be the source for the

dual–sine or the swept–sine waveform. Refer to “:LFOutput:SOURce" on page 295.

Example

:LFO:FUNC2:SHAP TRI

The preceding example selects a triangle wave for the Function Generator 2 LF output.

*RST SINE

Key Entry Sine Dual-Sine Swept-Sine Triangle Square Ramp Pulse

Noise

:LFOutput:FUNCtion:[1]|2:SHAPe:NOISe

Supported Option UNT

[:SOURce]:LFOutput:FUNCtion[1]|2:SHAPe:NOISe UNIForm|GAUSsian

[:SOURce]:LFOutput:FUNCtion[1]|2:SHAPe:NOISe?

Selects a gaussian or uniform noise modulation for the LF output.

Refer to “:LFOutput:FUNCtion[1]|2:SHAPe" on page 293 for selecting the waveform type.

Example

:LFO:FUNC1:SHAP:NOIS GAUS

The example selects a gaussian noise modulation for the Function Generator 1 LF output.

*RST UNIF

:LFOutput:FUNCtion[1]|2:SHAPe:RAMP

Supported Option UNT

[:SOURce]:LFOutput:FUNCtion[1]|2SHAPe:RAMP POSitive|NEGative

[:SOURce]:LFOutput:FUNCtion[1]|2SHAPe:RAMP?