Technical data

282 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
9 Analog Commands
Sets the linear depth step value in percent/volt units.
The step value set by this command is used with the UP and DOWN choices for the
“:AM[1]|2[:DEPTh][:LINear]" on page 280.
The setting enabled by this command is not affected by a N8211A/N8212A power-on,
preset, or *RST command.
Example
:AM:STEP 10
The example sets the step value for AM depth to 10%.
Range 0.1–100