Technical data

276 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
9 Analog Commands
:AM[1]|2:INTernal[1]:FREQuency:ALTernate
Supported Option UNT
[:SOURce]:AM[1]|2:INTernal[1]:FREQuency:ALTernate <val><units>
[:SOURce]:AM[1]|2:INTernal[1]:FREQuency:ALTernate?
Sets the frequency for the alternate signal. The alternate signal frequency is the second
tone of a dual–sine or the stop frequency of a swept–sine waveform.
Refer to“:AM[1]|2:INTernal[1]|2:FUNCtion:SHAPe" on page 277 for the waveform
selection.
Example
:AM2:INT1:FREQ:ALT 500KHZ
The example sets the alternate frequency (AM path 2, AM internal source 1) for AM tone 2
to 500 kHz.
*RST +4.00000000E+002
Range
• Dual-Sine & Sine: 0.5 Hz - 1 MHz
• Swept-Sine: 1 Hz - 1 MHz
:AM[1]|2:INTernal[1]:FREQuency:ALTernate:AMPLitude:PERCent
Supported Option UNT
[:SOURce]:AM[1]|2:INTernal[1]:FREQuency:ALTernate:AMPLitude:PERCent <val>
[:SOURce]:AM[1]|2:INTernal[1]:FREQuency:ALTernate:AMPLitude:PERCent?
Sets the amplitude of the second tone for a dual–sine waveform as a percentage of the total
amplitude. For example, if the second tone makes up 30% of the total amplitude, then the
first tone is 70% of the total amplitude.
Refer to “:AM[1]|2:INTernal[1]|2:FUNCtion:SHAPe" on page 277 for the waveform
selection.
Example
:AM2:INT1:FREQ:ALT:AMPL:PERC 50
The example sets the amplitude (AM path 2, AM internal source 1) for AM tone 2 to 50% of
the total amplitude.
*RST +5.00000000E+001