Technical data

270 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
8 Basic Function Commands
Trigger Sweep Subsystem ([:SOURce])
:TSWeep
Supported All
[:SOURce]:TSWeep
Aborts the current sweep, then either arms, or arms and starts a single list or step sweep,
depending on the trigger type.
The command performs the following:
• Arms a single sweep when BUS or EXTernal is the trigger source selection.
• Arms and starts a single sweep when IMMediate is the trigger source selection.