Technical data

246 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
8 Basic Function Commands
The example sets the frequency value for a four point sweep.
:LIST:FREQuency:POINts
Supported All
[:SOURce]:LIST:FREQuency:POINts?
Queries the current list sweep file for the number of frequency points.
:LIST:MANual
Supported All
[:SOURce]:LIST:MANual <val> |UP|DOWN
[:SOURce]:LIST:MANual?
Selects a list point or step sweep point as the current sweep point controlling the frequency
and power output. If list or step mode is controlling frequency or power, or both, the indexed
point in the respective list(s) is used.
The MANual mode must be selected and sweep enabled for this command to have an
effect.
For information on setting the proper mode, see “:LIST:MODE.
If the point selected is beyond the length of the longest enabled list, the point sets to the
maximum point, and an error is generated.
Example
:LIST:MAN UP
The example selects the next positive–direction, sequential point in the list.
Range •List Sweep: 1– 1601
Step Sweep: 1– 65535
*RST Option 520: +2.0000000000000E+10
Option 540
*
: +4.0000000000000E+10
* N8211A only
Range Option 520: 250kHZ–20GHZ
Option 540
*
: 250kHZ–40GHZ