Technical data

238 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
8 Basic Function Commands
:FREQuency:STARt
Supported All
[:SOURce]:FREQuency:STARt <val><units>
[:SOURce]:FREQuency:STARt?
Sets the frequency start point for a step sweep or ramp sweep (Option 007). In a ramp
sweep setup, the selected value must be less than or equal to the value selected for the
frequency stop point. In ramp sweep, this setting is coupled with the span and center
frequency settings.
Example
:FREQ:STAR 1GHZ
The example sets the start frequency for a sweep to 1 GHz.
:FREQuency:STOP
Supported All
[:SOURce]:FREQuency:STOP <val><units>
[:SOURce]:FREQuency:STOP?
Sets the stop frequency for a step sweep or ramp sweep (Option 007). In a ramp sweep
setup, the selected value must be greater than or equal to the value selected for the
frequency start point. In ramp sweep, this setting is coupled with the span and center
frequency settings.
Example
:FREQ:STOP 10GHZ
The example sets the stop frequency for a sweep to 10 GHz.
*RST Option 520: +2.0000000000000E+10
Option 540
*
: +4.0000000000000E+10
* N8211A only
Range Option 520: 250kHZ–20GHZ
Option 540
*
: 250kHZ–40GHZ