Technical data

216 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
7 System Commands
The example sets the preset state for the N8211A/N8212A to factory settings.
:PRESet
Supported All
SYSTem:PRESet
Returns the N8211A/N8212A to a set of defined conditions.
The defined conditions are either factory– or user–defined. Refer to “:PRESet:TYPE" on
page 217 for selecting the type of defined conditions.
:PRESet:ALL
Supported All
:SYSTem:PRESet:ALL
Sets all states of the N8211A/N8212A back to their factory default settings, including
states that are not normally affected by a power-on, preset, or *RST command.
:PRESet:PERSistent
Supported All
:SYSTem:PRESet:PERSistent
Sets the states that are not affected by a power-on, preset, or *RST command to their
factory default settings.
:PRESet:PN9
Supported All
:SYSTem:PRESet:PN9 NORMal|QUICk
:SYSTem:PRESet:PN9?
Sets the preset length of the PN9 sequence for personalities that require software PRBS
generation.
NORMal Produces a maximal length PN9 sequence.
QUICk Produces a truncated (216 bits) PN9 sequence.
Example
:SYST:PRES:PN9 NORMAL