Technical data

196 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
7 System Commands
Example
:OUTP:BLAN:ON
The example enables RF output blanking.
:MODulation[:STATe]
Supported Option UNT
:OUTPut:MODulation[:STATe] ON|OFF|1|0
:OUTPut:MODulation[:STATe]?
Enables or disables the modulation of the RF output with the currently active modulation
type(s). Most modulation types can be simultaneously enabled except FM with ΦM.
Example
:OUTP:MOD 0
The example disables RF modulation.
*RST 1
[:STATe]
Supported All
:OUTPut[:STATe] ON|OFF|1|0
:OUTPut[:STATe]?
Enables or disables the RF output. Although you can configure and engage various
modulations, no signal is available at the RF OUTPUT connector until this command is
executed.
Example
:OUTP ON
The example turns on the N8211A/N8212A’s RF output.
*RST 0