Technical data

174 Agilent N8211A/N8212A Performance Upconverter Synthetic Instrument Module, 250 kHz to 20 / 40 GHz
7 System Commands
:WBIQ:STOP
Supported N8212A
:CALibration:WBIQ:STOP <val><units>
:CALibration:WBIQ:STOP?
Sets the stop frequency and automatically sets the calibration type to User for a wideband
I/Q calibration.
The setting enabled by this command is not affected by a power-on, preset, or *RST
command.
Example
:CAL:WBIQ:STOP 2GHZ
The example sets the stop frequency to 2 GHz for a wideband IQ calibration.