User`s guide

Using the System Utilities 4
Model N6705A User’s Guide 89
Installing Options
The Install Options function lets you install firmware options into the
DC Power Analyzer. At present, the only option that can be installed
in the instrument after it has been purchased is Option 001, Data
Logger Software. Note that this option can only be installed if the
instrument had been purchased with Option 055, Delete Data Logger.
To access the disk management utilities, log into the Administrative
Tools menu, then select Install Options. From the dropdown menu,
select the option you wish to install and enter the Access Key number
from your software license documentation.
Obtaining the License
To obtain the license, you must first purchase the option. After you
have purchased the option, you will receive a Software Entitlement
Certificate. When this is received, you can obtain the license.
To obtain the software license for the Option 001 Data Logger
Software, go to: http://www.agilent.com/find/softwarelicense
and
follow the on-screen directions.
1. Log in by entering the Order number and Certificate number.
These appear in the upper right corner of your Software
Entitlement Certificate. Click Next.
2. Under Request License(s) for, check the box labeled “One or
more products on a single instrument or host computers”.
Click Next.
3. In the Please Select Products dropdown list, select “N6705V-
001”. Click Add. Then enter the Agilent instrument serial
number of the DC Power Analyzer for which you wish to
license the Data Logger Software. The serial number is
located on the rear panel of the instrument. You can also
view the serial number by pressing Settings then Properties.
Click Next.
4. Review your selections. Click Next.
5. Enter the e-mail address you want the license emailed to.
Click Submit.
After finishing the license request procedure, an Access Key will be
emailed to you shortly. Enter the Access Key into the Key field of the
Install Options window shown on the previous page.