User`s guide

Operating the DC Power Analyzer 3

Model N6705A User’s Guide 57

Marker View

Symbol/Field: Description:

1 m1/m2 points

Shows where the measurement markers intersect the selected

waveform. Data values at the bottom of the display are referenced to

the intersect locations of the markers. Calculations are based on the

data points in between the intersect locations.

2 Delta

Indicates the delta between the markers in units (volts, amps, or

watts) and in time (seconds). The value in parenthesis is the

frequency, which is the reciprocal of the time (1/time).

3 m2

Indicates the m2 marker value in volts, amps, or watts at the

intersection point. Also indicates the distance in time that the m2

marker is in relation to the present trigger position.

4 m1

Indicates the m1 marker value in volts, amps, or watts at the

intersection point. Also indicates the distance in time of the m1

marker in relation to the present trigger position.

5 Min

Indicates the minimum data value (in volts, amps, or watts) between

the marker locations of the selected waveform. Also indicates the

distance in time of the minimum value in relation to the present

trigger position.

6 Avg

Calculates the average data value (in volts, amps, or watts) between

the marker locations of the selected waveform. Time information is

not valid for calculated values.

7 Max

Indicates the maximum data value (in volts, amps, or watts) between

the marker locations of the selected waveform. Also indicates the

distance in time of the maximum value in relation to the present

trigger position.

8 I p-p

Calculates the difference between the maximum and minimum values.

Time information is not valid for calculated values.