User`s guide

Installation 2
Model N6705A User’s Guide 25
Items Supplied
Item Description Part Number
Power Cord A power cord suitable for your location. Shipped w/mainframe Call Agilent Sales & Support Office
Digital Connector 8-pin connector for connecting signal lines to the digital port.
Shipped w/ mainframe
Agilent 1253-6408
Phoenix Contact MC 1,5/8-ST-3,5
Product Reference CD-ROM Includes software and documentation.
Shipped w/ mainframe Agilent N6705-13601
Automation-Ready CD-ROM Contains Agilent IO Libraries Suite. Shipped w/ mainframe Agilent E2094N
T-10 Torx tool Hex key for installing or removing power modules. Shipped w/
mainframe. (A flat blade screwdriver can also be used.)
Agilent 8710-2416
Power Module Calibration
Certificate
A certificate of calibration referenced to the serial number.
Shipped w/ power module
N/A
Installing the Unit
Safety Considerations
This DC Power Analyzer is a Safety Class 1 instrument, which means
it has a protective earth terminal. That terminal must be connected to
earth ground through a power source equipped with a ground
receptacle.
Refer to the Safety Summary page at the beginning of this guide for
general safety information. Before installation or operation, check
the DC Power Analyzer and review this guide for safety warnings and
instructions. Safety warnings for specific procedures are located at
appropriate places throughout this Guide.
Environment
WARNING
Do not operate the instrument in the presence of flammable gasses or fumes
The environmental conditions of the instrument are documented in
Appendix A. Basically, the instrument should only be operated
indoors in a controlled environment.
The dimensions of your instrument as well as an outline diagram are
given in Appendix A. Fans cool the DC Power Analyzer by drawing
air through the side and exhausting it out the opposite side and back.
The instrument must be installed in a location that allows sufficient
space at the sides and back of the unit for adequate air circulation.