User`s guide

Installation 2
Model N6705 User’s Guide 51
5 You can now use Interactive IO within the Connection Expert to
communicate with your instrument, or you can program your
instrument using the various programming environments. You
can also use the Web browser on your computer to connect to the
instrument as described under “Connecting to the Web Server”.
Viewing the Active LAN Status
To view the currently active LAN settings, press the Menu key, scroll
down and select the Utilities, then select I/O Configuration, then
Active LAN Status.
Note that the currently active LAN settings for the IP Address,
Subnet Mask, and Default Gateway may be different from the settings
specified in the “Modify LAN Settings” window - depending on the
configuration of the network. If the settings are different, it is
because the network has automatically assigned its own settings.
Modifying the LAN Settings
As shipped from the factory, the DC Power Analyzer’s pre-configured
settings should work in most LAN environments. If you need to
manually configure these settings, press the Menu key, scroll down
and select Utilities, then I/O Configuration, then LAN Settings.
NOTE
Either the Restart LAN button must be selected, or the DC Power Analyzer must
be rebooted for any LAN parameter modifications to take effect.
You can configure the following items in the LAN Settings window: