User`s guide

4 Model N6705 User’s Guide
In this Book
Specific chapters in this manual contain the following information:
 Quick Reference – Chapter 1 is a quick reference section that
helps you quickly become familiar with your DC Power Analyzer.
 Installation – Chapter 2 describes how to install your DC Power
Analyzer. It discusses topics such as how to connect loads to the
output, 4-wire sensing, parallel and series connections.
 Using the Source functions – Chapter 3 describes how to use the
power supply and the arbitrary waveform generator using the
front panel and SCPI commands.
 Using the Measurement functions – Chapter 4 describes how to
use the front panel output meters, scope view, and data logger.
 Using the System functions – Chapter 5 describes file functions
and administrative functions.
 Advanced Source and Measurement Functions – Chapter 6
discusses advanced source functions and measurement functions
such as lists, digitizing measurements, and external data logging.
 Specifications – Appendix A describes the mainframe
characteristics.
 SCPI Commands – Appendix B summarizes the SCPI commands.
 Using the Digital Port – Appendix C describes how to configure
and use the digital port on the instrument’s rear panel.
For complete details on the SCPI (Standard Commands for
Programmable Instruments) commands, refer to the N6705
Programmer’s Reference Help file included on the Agilent N6705
Product Reference CD. This CD-ROM is shipped along with your
instrument.
NOTE
You can contact Agilent Technologies at one of the following telephone
numbers for warranty, service, or technical support information.
In the United States: [phone]
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Agilent in your country or
specific location:
www.agilent.com/find/assist
Or contact your Agilent Technologies Representative.