User`s guide

2 Installation
26 Model N6705 User’s Guide
General Information
Models
Agilent Model Description
N6705A, N6705B 600 W DC Power Analyzer mainframe - without power modules
N6715A, N6715B Build-to-order DC Power Analyzer system - mainframe with installed power modules
N6731B / N6741B 50 W / 100 W 5 V DC Power Module
N6732B / N6742B
50 W / 100 W 8 V DC Power Module
N6733B / N6743B / N6773A 50 W / 100 W / 300 W 20 V DC Power Module
N6734B / N6744B / N6774A 50 W / 100 W / 300 W 35 V DC Power Module
N6735B / N6745B / N6775A 50 W / 100 W / 300 W 60 V DC Power Module
N6736B / N6746B / N6776A, N6777A 50 W / 100 W / 300 W 100 V DC Power Module
N6751A / N6752A 50 W / 100 W High-Performance Autoranging DC Power Module
N6753A, N6754A / N6755A , N6756A 300 W / 500 W High-Performance Autoranging DC Power Module
N6761A / N6762A 50 W / 100 W Precision DC Power Module
N6763A, N6764A / N6765A, N6766A 300 W / 500 W Precision DC Power Module
N6781A, N6782A, N6784A 20 W Source/Measure Unit (SMU)
N6783A-MFG / N6783A-BAT 18 W / 24 W Application-Specific DC Power Module
Options
Mainframe Options
Description
ABA English Manual Set. Contains User’s Guide and Service Guide. Also available as p/n N6705-90000.
ABJ
Japanese Manual Set. Contains User’s Guide and Service Guide. Also available as p/n N6705-90403.
AB1 Korean Manual Set. Contains User’s Guide and Service Guide. Also available as p/n N6705-90406.
AB2 Chinese Manual Set. Contains User’s Guide and Service Guide. Also available as p/n N6705-90408.
AKY Deletes the front and rear panel USB connector.
055
Deletes the Data Logger function.
056 Agilent 14585A Control and Analysis Software.
908 Rack Mount Kit. For mounting in a 19-inch EIA rack cabinet. Also available as p/n 5063-9215.
909 Rack Mount Kit with handles. Also available as p/n 5063-9222.
Power Module Options
760
NOTE 1
Output disconnect/polarity reversal. Disconnects the + and – output and sense terminals. Switches the
+ and – output and sense polarities. Not available on N6741B, N6751A, N6752A, N676xA, or N678xA.SMU.
761
NOTE 1
Output disconnect. Disconnects + and – output and sense terminals. Available for all power modules.
LGA
Large gate array. Required on Models N6751A, N6752A for use in the DC Power Analyzer.
UK6 Commercial calibration with test results data
1A7 ISO 17025 calibration certificate
2UA 200 microampere measurement range with output disconnect relays. Only on Models N6761A, N6762A.
1
A small AC network is always present across the output terminals.