User`s guide

Appendix B SCPI Commands
192 Model N6705 User’s Guide
SCPI Command Description
STATus (continued)
:QUEStionable
[:EVENt]? (@chanlist)
Returns the value of the questionable event register
:CONDition? (@chanlist)
Returns the value of the questionable condition register
:ENABle <NRf>, (@chanlist)
Enables specific bits in the event register
:NTRansition <NRf>, (@chanlist)
Sets the negative transition filter
:PTRansition <NRf>, (@chanlist)
Sets the positive transition filter
SYSTem
:CHANnel
[:COUNt]?
Returns the number of output channels in a mainframe
:MODel? (@chanlist)
Returns the model number of the selected channel
:OPTion? (@chanlist)
Returns the option installed in the selected channel
:SERial? (@chanlist)
Returns the serial number of the selected channel
:COMMunicate
:RLSTate LOCal | REMote | RWLock
Specifies the Remote/Local state of the instrument
:TCPip:CONTrol?
Returns the control connection port number
:DATE <yyyy>,<mm>,<dd>
Sets the date of the system clock
:ERRor?
Returns the error number and error string
:GROup
:CATalog?
Returns the groups that have been defined (NOT for N678xA SMU)
:DEFine (@chanlist)
Group channels to create a single output (NOT for N678xA SMU)
:DELete <channel>
Deletes the specified channel from a group (NOT for N678xA SMU)
:ALL
Ungroups all channels (NOT for N678xA SMU)
:PASSword:FPANel:RESet
Resets the front panel lock password to zero
:REBoot
Returns the unit to its power-on state
:TIME <hh>,<mm>,<ss>
Sets the time of the system clock
:VERSion?
Returns the SCPI version number
TRIGger
:ACQuire
[:IMMediate] (@chanlist)
Triggers the measurement immediately
:CURRent
[:LEVel] <NRf>, (@chanlist)
Sets the current trigger level
:SLOPe POSitive | NEGative, (@chanlist)
Sets the current trigger slope
:SOURce <source>, (@chanlist)
Sets the measurement trigger source <source> = BUS,
CURRent<n>,EXTernal, PIN<n>, TRANsient<n>, VOLTage<n>
:TOUTput
[:ENABle] <Bool>, (@chanlist)
Enables measurement triggers to be sent to a digital port pin
:VOLTage
[:LEVel] <NRf>, (@chanlist)
Sets the voltage trigger level
:SLOPe POSitive | NEGative, (@chanlist)
Sets the voltage trigger slope
:ARB:SOURce BUS | IMMediate | EXTernal
Sets the arbitrary waveform trigger source
:DLOG
[:IMMediate]
Triggers the internal data logger immediately
:CURRent
[:LEVel] <NRf>, (@chanlist)
Sets the current trigger level of the data logger
:SLOPe POSitive | NEGative, (@chanlist)
Sets the current trigger slope of the data logger
:SOURce <source>
Sets the internal data logger trigger source <source> = BUS,
CURRent<n>, EXTernal, IMMediate, VOLTage<n>, ARSK, OOOK
:VOLTage
[:LEVel] <NRf>, (@chanlist)
Sets the voltage trigger level of the data logger
:SLOPe POSitive | NEGative, (@chanlist)
Sets the voltage trigger slope of the data logger