Specifications

4
Each DC power module in the Agilent
N6705 DC power analyzer has a fully
integrated voltmeter and ammeter
to measure the actual voltage and
current being sourced out of the DC
output into the DUT. Because this
voltmeter/ammeter function is built
in, it is easy to make measurements
without additional wires or the added
complexity of current sense resistors
or current shunts. The accuracy of the
voltage and current measurements
are based on the type of module that
is installed (basic, high-performance,
precision, or SMU). You can find the
accuracy specification in the tables
starting on page 16 under “Voltage
Measurement Accuracy” and
“Current Measurement Accuracy.”*
Voltmeter/Ammeter: Meter View
Figure 3. In Meter View, all 4 outputs
can be viewed simultaneously. The both
measured values for voltage and current
and setting for voltage and current are
displayed for each output.
Figure 4. In Meter View, you can also
view an enlarged view of one channel,
displaying many settings and measured
values, for that channel. A summary is
shown for the other three channels.
* Complete specifi cations are available at
http://cp.literature.agilent.com/
litweb/pdf/N6700-90001.pdf.