Specifications

13
N6730/40/70 basic series
Use the N6730/40/70 DC power
modules for basic applications –
Now with voltages up to 150 V
Not all testing requires high-perfor-
mance power supplies. When your
budget is tight and when speed and
accuracy are a lower consideration,
the N6730 Series of 50 W DC power
modules, the N6740 Series of 100 W
DC power modules, and the N6770
Series of 300 W DC power modules
are an economical solution that give
you clean, reliable DC power.
The N6730/40/70 series DC power
modules provide programmable volt-
age and current, measurement and
protection features at a very economi-
cal price. These power modules offer
a wide range of voltage, current, and
power outputs. In oscilloscope mode,
they can be configured to display
either a voltage or a current trace.
Choosing the Right DC Power Modules to Meet Your Testing Needs
N6750 high-performance series
Use the N6750 DC power modules for
applications where the power supply
plays a critical role – Now with
available power up to 500 W
The Agilent N6750 series of
high-performance, autoranging DC
power modules provide low noise,
high accuracy, and output voltage
changes that are up to 10 to 50 times
faster than other power supplies.
Additionally, autoranging output
capabilities enable one power supply
to do the job of several traditional
power supplies.
The N6750 series combine the widest
arbitrary waveform generator band-
width, available power up to
500 W, and high-accuracy measure-
ments. In oscilloscope mode, they
can be configured to display either a
voltage or a current trace.
N6760 precision series
Use the N6760 DC power modules
for applications where precision
low-level performance is required –
Now with available power up to 500 W
The N6760 precision DC power
modules provide dual ranges on both
programming and measurement. In
the low range, these power supplies
provide 16-bit voltage and current
programming, and 18-bit measure-
ments precision in the milliampere
and microampere region. They are
ideally suited for semiconductor and
passive device testing, or where a
precisely controlled output and highly
accurate, precise, measurements are
needed during test.
The N6760 precision DC power mod-
ules also provide fast output changes
for wide arbitrary waveform generator
bandwidth. In oscilloscope mode, the
precision DC power modules offer the
ability to view both a voltage and a
current trace simultaneously.
N6780 SMU series
Use the N6780 source/measure units
for the most demanding applications
where multi-quadrant operation and
high precision are required
The N6780 series of source/measure
units offer the highest level of
performance in the N6700 series.
These SMUs feature highly accurate
measurements down to nanoamperes,
while providing operation as a DC
voltage source, DC current source,
and electronic load.
For details on these products and
how they can be used for applications
including battery drain analysis and
functional test, visit
www.agilent.com/find/N6780
and download the N6780 Series
Source/Measure Units (SMUs) for
the N6700 Modular Power System
Data Sheet, literature number
5990-5829EN.
N6783 application-specifi c
series
For details on these products and
how they can be used for specific
applications visit
www.agilent.com/find/N6783A-BAT
www.agilent.com/find/N6783A-MFG
and download the N6783A-BAT Data
Sheet, 5990-8662EN and the N6783A-
MFG Data Sheet, 5990-8643EN.
Figure 15. The basic series.
Figure 16. The N6750 high-performance
series and N6760 precision series DC
power modules that are ≥ 300 W each
occupy two modules slots within the
mainframe. All other modules occupy one
module slot.