Specifications
11
Triggering
The Agilent N6705 DC power analyzer
has hardware trigger in/trigger out
signals which permit the Agilent
N6705 to be synchronized with other
test equipment. For example, when
you turn on the outputs of the Agilent
N6705, it can generate a trigger
signal to start a measurement on an
RF power meter.
Connectivity
The Agilent N6705 DC power analyzer
comes standard with GPIB, USB 2.0,
and 10/100 base-T ethernet LAN
interfaces. The Agilent N6705 is
fully compliant with the LXI class C
specification.
Security
All non-volatile RAM data and
settings can be cleared from the
front panel. For customers who
have security concerns about USB
access to internally stored test data
and setups, the Agilent N6705 also
offers option AKY, which removes
the USB ports from the front and rear
of the Agilent N6705. When used in
systems running GPIB, the LAN and/
or USB interfaces can be disabled for
extra security.
Control from any browser
The Agilent N6705 can be controlled
via a standard web browser. The
Agilent N6705 contains a web server
that provides a webpage containing a
graphical front panel representation
of the Agilent N6705 front panel. The
Web GUI operation is identical to
operating the real front panel on the
Agilent N6705 DC power analyzer.
Drivers
For customers who wish to operate
the DC power analyzer under
computer control, the Agilent N6705
comes with both VXIplug&play drivers
and IVI-COM drivers. LabView drivers
are available at NI.COM.
Programming language
The Agilent N6705 supports
SCPI (Standard Commands for
Programmable Instruments). Note
that the Agilent N6705’s command
set is compatible with the N6700
modular power system for ATE,
so programs written for the
Agilent N6700 will work on the
Agilent N6705.
Firmware updates
The Agilent N6705 firmware is stored
in FLASH ROM and can be easily
updated when new features become
available. Firmware can be downloaded
into the Agilent N6705 over GPIB,
LAN, or USB using the supplied
firmware update utility program.
Firmware updates can be found at
www.agilent.com/find/
N6705firmware.
14585A control & analysis
software
Control up to four N6705 mainframes.
For details visit
www.agilent.com/find/14585.