User`s guide
Table Of Contents
- Legal Notices
- Safety Notices
- In this Book
- Contents
- Quick Reference
- Installation
- Operating the Power Supply Locally
- Operating the Power Supply Remotely
- Language Reference
- SCPI Command Summary
- Calibration Commands
- Measure Commands
- Output Commands
- Source Commands
- [SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]
|MIN|MAX [SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]? [MIN|MAX] [SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude] |MIN|MAX [SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude]? [MIN|MAX] - [SOURce:]CURRent:PROTection:STATe ON|OFF [SOURce:]CURRent:PROTection:STATe?
- [SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
|MIN|MAX [SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]? [MIN|MAX] [SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude] |MIN|MAX [SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]? [MIN|MAX] - [SOURce:]VOLTage:LIMit:LOW
|MIN|MAX [SOURce:]VOLTage:LIMit:LOW? [MIN|MAX] - [SOURce:]VOLTage:PROTection:LEVel
|MIN|MAX [SOURce:]VOLTage:PROTection:LEVel? [MIN|MAX]
- [SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]
- Status Commands
- STATus:PRESet
- STATus:OPERation[:EVENt]?
- STATus:OPERation:CONDition?
- STATus:OPERation:ENABle
STATus:OPERation:ENABle? - STATus:OPERation:NTR
STATus:OPERation:PTR STATus:OPERation:NTR? STATus:OPERation:PTR? - STATus:QUEStionable[:EVENt]?
- STATus:QUEStionable:CONDition?
- STATus:QUEStionable:ENABle
STATus:QUEStionable:ENABle? - STATus:QUEStionable:NTR
STATus:QUEStionable:PTR STATus:QUEStionable:NTR? STATus:QUEStionable:PTR? - *CLS
- *ESE *ESE?
- *ESR?
- *OPC *OPC?
- *SRE *SRE?
- *STB?
- *WAI
- System Commands
- Trigger Commands
- Programming Examples
- Specifications
- Verification and Calibration
- Verification
- Equipment Required
- Measurement Techniques
- Constant Voltage Tests
- Constant Current Tests
- Test Record Form – Agilent N5741A and N5761A
- Test Record Form – Agilent N5742A and N5762A
- Test Record Form – Agilent N5743A and N5763A
- Test Record Form – Agilent N5744A and N5764A
- Test Record Form – Agilent N5745A and N5765A
- Test Record Form – Agilent N5746A and N5766A
- Test Record Form – Agilent N5747A and N5767A
- Test Record Form – Agilent N5748A and N5768A
- Test Record Form – Agilent N5749A and N5769A
- Test Record Form – Agilent N5750A and N5770A
- Test Record Form – Agilent N5751A and N5771A
- Test Record Form – Agilent N5752A and N5772A
- Calibration
- Verification
- Service
- Compatibility
- Index
- Declaration of Conformity
Appendix B Verification and Calibration
104 Series N5700 User’s Guide
Test Record Form – Agilent N5744A and N5764A
Agilent N5744A and N5764A Report No _______________ Date __________________
Description Model Minimum Specs. Results Maximum Specs.
Voltage Programming & Readback
Minimum Voltage Vout
Front Panel Display Readback
High Voltage Vout
Front Panel Display Readback
Both
Both
Both
Both
− 10 mV
Vout − 20 mV
19.98 V
Vout − 40 mV
__________
__________
__________
__________
+ 10 mV
Vout + 20 mV
20.02 V
Vout + 40 mV
CV Load Effect Both − 4 mV __________ + 4 mV
CV Source Effect Both − 4 mV __________ + 4 mV
CV Ripple and Noise
peak-to-peak
rms
Both
Both
N/A
N/A
__________
__________
60 mV
8 mV
Transient Response
Voltage @ 1ms
Both
− 100 mV
__________
+ 100 mV
Current Programming & Readback
Minimum Current Iout
Front Panel Display Readback
High Current Iout
Front Panel Display Readback
N5744A
N5764A
N5744A
N5764A
N5744A
N5764A
N5744A
N5764A
− 38 mA
− 76 mA
Iout − 114 mA
Iout − 228 mA
37.924 A
75.848 A
Iout − 152 mA
Iout − 304 mA
__________
__________
__________
__________
__________
__________
__________
__________
+ 38 mA
+ 76 mA
Iout + 114 mA
Iout + 228 mA
38.076 A
76.152 A
Iout + 152 mA
Iout + 304 mA
CC Load Effect
N5744A
N5764A
− 12.6 mA
− 20.2 mA
__________
__________
+ 12.6 mA
+ 20.2 mA
CC Source Effect
N5744A
N5764A
− 5.8 mA
− 9.6 mA
__________
__________
+ 5.8 mA
+ 9.6 mA
Test Description N5744A Setting N5764A Setting
Voltage Programming & Readback, Min Voltage 0 V, 0 A 0 V, 0 A
Voltage Programming & Readback, High Voltage 20 V, 0 A 20 V, 0 A
CV Load Effect, Source Effect, Ripple and Noise 20 V, 38 A 20 V, 76 A
Transient Response 20 V, from 3.8 A to 34.2 A 20 V, from 7.6 A to 68.4 A
Current Programming & Readback, Min Current 0 A, 20 V 0 A, 20 V
Current Programming & Readback, High Current 38 A, 20 V 76 A, 20 V
CC Load Effect, Source Effect 38 A, 20 V 76 A, 20 V
Load Requirements N5744A N5764A
Current shunt 0.01Ω 100 A 0.01Ω 100 A
Agilent N3300 Electronic load modules 2 – N3305A 3 – N3305A
Fixed Resistor for CV Ripple and Noise 0.53Ω 1kW 0.26Ω 2kW