Technical data

On-The-Go Electrical Tests 8
Notes on USB Electrical Compliance Testing 233
E20 B-Device VBUS Valid
1 Set the OET switches to the following settings.
E22 Data-Line Pulsing Test
1 Set the OET switches to the following settings.
A-Device VBUS Valid (VA_VBUS_VLD)
1 Set the OET switches to the following settings.
E1 E2 A-Device VBUS Valid (VMin)
E1 E2 A-Device VBUS Valid (VMean)
Viewing Test Results
1 When the Testing Complete dialog appears, click OK.
The Results tab shows the test results.