User`s guide

50 User’s Guide
U3025AE10 Operational Check
10.Compare the Reflection Tracking (1,1) trace to the appropriate limits in Table 12 on
page 43. This can be done using Limit Lines (press Trace > Limit Test) or Marker. The
trace should be above the limit line and PASS will be displayed on the screen. Refer to
Figure 48.
11.Repeat step 9 and step 10 for Cal Sets “999.1” thru “999.12” (12-Port).
Figure 48 E8364B/C Reflection Tracking Trace (Ports 1-12)