User`s guide

44 User’s Guide
U3025AE10 Operational Check
Equipment Required
The Agilent U3025AE10 requires that the user be familiar with the equipment and
components listed in Table 13.
This section provides an equipment list and setup of the PNA and Test Set.
Table 13 Equipment List
Description Qty
E8364B/C 2-Port Network Analyzer (Option 014 or 551) or
N5230A/C 2-Port Network Analyzer (Option 525 or 551)
1
N4693A ECal Module with a female connector, or a 2.4 mm Cal kit
(85056B, 85057D, etc.)
1
Set of interconnect cables (PNA and Test Set), see “12-Port RF Cable
Connections” on page 17.
1