User`s guide

User’s Guide 33
U3025AE10 Controlling the System with E8363/4C and N5230C
Trace Measure S-Parameter
S-Parameter selection can be accomplished using Response Measure menu. Select TRACE
> Measure. Use the drop-down menus to select 1 of 144 S-Parameters for the 12-Port
system, see Figure 30. The first number in the Sxx selection is the Receiver Port and the
second number will be the Source Port. Any port can be selected to be the Receiver, Source
or both, as in S11. The front panel R LED indicates the port is the Receiver and the S LED
indicates the port is the Source.
Figure 30 12-Port Trace Measure
New Trace Measure S-Parameter
S-Parameter Tab: Multiple S-Parameters can be made from the New Measurement
menu. In the drop-down menu select Trace > New Trace. The New Measurement window
allows the selection of any of the 144 S-Parameter's. See Figure 31 and Figure 32 on
page 34.
Figure 31 Selecting PNA New Trace Measure