User`s guide

32 User’s Guide
U3025AE10 Controlling the System with E8363/4C and N5230C
The External Test Set Control-U3025AE10 also allows control of the DUT control lines,
refer to “DUT Control Lines” on page 38. To change the state from LOW to HIGH, select
the graphical user interface (GUI) for the specific control (LINE 1 through 8) and then
press OK. Each line can be controlled separately, see Figure 28.
Figure 28 External Test Set U3025AE10 (Port 1 - 8)
Select the Port Control down arrow for Ports 9 through 12.
Figure 29 External Test Set U3025AE10 (Port 9 - 12)
Control Lines