User`s guide

User’s Guide 15
U3025AE10 System Setup E8363B/C, E8364B/C, or N5230A/C
System Setup E8363B/C, E8364B/C, or N5230A/C
WARNING The opening of covers or removal of parts is likely to expose
dangerous voltages. Disconnect the instrument from all voltage
sources while it is being opened.
Preparing the PNA Network Analyzer
1. Remove the feet from the bottom of the network analyzer. Refer to Figure 6.
2. Remove the 2 lower standoffs and screws (0515-1619) from the rear panel on the
network analyzer. Refer to Figure 6.
Figure 6 Rear Bottom Feet
3. Install the two rear locking feet (5023-0132) using the included screws (0515-1619),
where the standoffs were removed. Refer to Figure 7.
Figure 7 Install Locking Feet
Standoffs (x2)
Feet (x4)
Locking Feet
(5023-0132)
Included in package
Screws (0515-1619)